SBC Engine Lifting "Rings"
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Oct 2009
Posts: 1
SBC Engine Lifting "Rings"
Chevrolet installed on some of their V8 engines "lifting rings" held onto the head by 2 bolts. Each had a 3/4 or 1" hole in the vertical part of the "ring" and I believe this was used by the factory during installation of the engine and simply left on the engine instead of taking time to remove. I need 2 of these things and would be grateful to anyone out there willing to be of help in this matter. Jim @ [email protected]
#2
Senior Member
RACING JUNKIE
Join Date: Mar 2006
Location: EUGENE,OR.
Posts: 3,391
Hi Jim,
Had them on last two engines... I remember running some wire-loom through them on one motor. I might still have one that I removed on my last motor in truck. I will check this weekend on my boxes... I might only have 1. How many you need?
Had them on last two engines... I remember running some wire-loom through them on one motor. I might still have one that I removed on my last motor in truck. I will check this weekend on my boxes... I might only have 1. How many you need?