everybody post a pic of there ride
#452
Senior Member
MASTER BUILDER
Join Date: Oct 2006
Location: Fontana, KS
Posts: 171
Originally Posted by spib
http://www.cardomain.com/ride/2393675 click on this , most have seen my junk!!!!!!!!!! click on spib43 on upper left to see more pics of my 67 :lol: :lol:
#453
Senior Member
MASTER BUILDER
Join Date: Oct 2006
Location: Fontana, KS
Posts: 171
I dont have any pics of my rides but I got two usmts modifieds one with a injected 410 all aluminum small block that made a pull of 800hp on the dyno and in the other is a carburated 408 small block that made a pull of 705hp on the dyno... My top speed at the belleville highbanks was about 130mph at the end of the straight away with the 410 and with the 408 it was about 118mph and let me tell ya it hurts alot when you hook the cushion and get airborne at those speeds lol go to www.northmotorsports.com and go to mod pics to see the cars the black car has the 410 and the blue car has the 408
#459
Junior Member
SHOW GUEST
Join Date: Nov 2007
Posts: 1
I have a all stock 1967 Rs Camaro, 2006 Tacoma Blue, 350 Sbc, TH350, Centerlines on front, and soon to be 15x8 Camaro/Corvette rallys on back, with snorkle hood scoop.
Race Car: 1978 Olds Cutlass Supreme, 327 Sbc .30, 250 spray, Centerlines, 11.5" Hoosier slicks, fuel cell, battery in trunk, Holley fuel pump w/ big fuel filter, racing seats, 5 pnt harnesses, B&M Ratchet shifter, tach with light, 3" cowl hood, GM 12 bolt ( 4:56 gears, mini spool, stock Chevelle 30 spline axles, c-clips ), no A/C or heater. And believe it or not this has not been cut up at all, inside we just took the heater controls out and put a small panel and put the switches there in stead of putting holes every where.
Race Car: 1978 Olds Cutlass Supreme, 327 Sbc .30, 250 spray, Centerlines, 11.5" Hoosier slicks, fuel cell, battery in trunk, Holley fuel pump w/ big fuel filter, racing seats, 5 pnt harnesses, B&M Ratchet shifter, tach with light, 3" cowl hood, GM 12 bolt ( 4:56 gears, mini spool, stock Chevelle 30 spline axles, c-clips ), no A/C or heater. And believe it or not this has not been cut up at all, inside we just took the heater controls out and put a small panel and put the switches there in stead of putting holes every where.