First Test-N-Tune with new 427 SBC Stroker
#1
First Test-N-Tune with new 427 SBC Stroker
The new Dart block 427 SBC stroker is running and I took it to the track last weekend. First time out with some easy passes and on a slick track it went 9.30s @ 144.8! So, I believe it has 8.90s potential once I get everything sorted out and get on a good track in a few weeks.
Here are the engine components; Dart Pro-1 230 heads, Stahl 1-7/8" to 2" step-tube headers, Comp custom roller, Jesel shaft rockers, JE 14.4-1 pistons, CompStar 6" rods and Dragonslayer 4" crank. Also, Demon 820 and all N/A (no juice).
Here are some video links from last weekend. Turn-up the speakers and let me know what you think!!!
Warren
http://s476.photobucket.com/albums/r...t=100_1805.flv
http://s476.photobucket.com/albums/r...t=100_1806.flv
http://s476.photobucket.com/albums/r...t=100_1808.flv
Here are the engine components; Dart Pro-1 230 heads, Stahl 1-7/8" to 2" step-tube headers, Comp custom roller, Jesel shaft rockers, JE 14.4-1 pistons, CompStar 6" rods and Dragonslayer 4" crank. Also, Demon 820 and all N/A (no juice).
Here are some video links from last weekend. Turn-up the speakers and let me know what you think!!!
Warren
http://s476.photobucket.com/albums/r...t=100_1805.flv
http://s476.photobucket.com/albums/r...t=100_1806.flv
http://s476.photobucket.com/albums/r...t=100_1808.flv
#5
Originally Posted by gnsrule
Lookes and sounds good Warren. It that off the foot brake ? Oughta be a bad ass ride w/ a trans brake.
Craig
Craig
The 9.30 was foot-braking and flashing the converter off 2000 RPM. I've got the full electronics package with trans-brake, but I've been running in No-E for the past few years and plan to stay in No-E this season. Possibly have the fastest No-E car around here. :shock:
Warren
#7
Senior Member
MASTER BUILDER
Join Date: Apr 2003
Location: Brookings South Dakota
Posts: 244
Originally Posted by TheEngineer
Originally Posted by cncmotorsports
Warren, car sounds good, leaves nice also
Warren
We wish you the best of luck..
#8
Originally Posted by cncmotorsports
Originally Posted by TheEngineer
Originally Posted by cncmotorsports
Warren, car sounds good, leaves nice also
Warren
We wish you the best of luck..
I'm really excited with how well it's running and can't wait to run it all-out on a good track.
Thanks again for building me a really great short-block assembly.
Warren
#9
Beautiful car Warren. I hope to someday get to meet you. That track scares the crap out of me when it is cold. Maybe someday you can come a little further north and east. Have fun and be safe.
Curtis
Curtis
#10
Originally Posted by doorracer
Beautiful car Warren. I hope to someday get to meet you. That track scares the crap out of me when it is cold. Maybe someday you can come a little further north and east. Have fun and be safe.
Curtis
Curtis
Good to hear from you! I'm also looking forward to meeting you, hopefully we'll run into each other this summer. I might come up to Tulsa for a bracket race, it's been about four years since I've been there.
The track at TVRP is really scarey now, I got a little loose last Sunday just before the 1000 ft at 140 MPH+. I let off and it straightened-up, however my butt was really puckered-up!!! I was in the center of the lane, but there isn't a groove established just yet. I'm going back to the track this Sunday for another TnT, if it doesn't rain.
Warren
http://gi77.photobucket.com/groups/j...g?t=1267913388