Looking for SBC pistons
#1
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Feb 2004
Location: IN
Posts: 176
Looking for SBC pistons
I'm needing a set for a 388ci motor. 4.060 bore 6" rod 3.75 stroke. Anybody got any? Let me know. Like the rest of us, I'm working on a tight budget now days.
Thanks, Dave
Thanks, Dave
#2
Senior Member
DYNO OPERATOR
Join Date: Mar 2009
Location: Booneville,Ms
Posts: 505
Cheapest place I can find pistons and a good selection of them is Competition Products. w/o being on ebay or RJ but then again unless you can look at them in person buying pistons on them sites are kind of risky. Thats why I'd buy from a company instead from an individual. JMO
#4
Senior Member
RACING JUNKIE
Join Date: Dec 2004
Location: austin texas
Posts: 729
your cheapest option is to run a stock 350 piston thats .060 wether its cast, hyper, or forged and a 5.565 rod and your crank. I am assuming this is a round round engine?
To do it right there is not a cheap way than buy the right piston
To do it right there is not a cheap way than buy the right piston