rotor phaseing
11-11-2007, 09:32 AM
Member
CRAFTSMAN
Thread Starter
Join Date: Sep 2006
Posts: 62
rotor phaseing
i believe msd says to use a non adjustable timing gun to do this. i set my crank trigger with a adjustable gun with the knob turned to o, so wont that work also for the phasing? thanks guys
11-11-2007, 11:32 AM
Senior Member
SENIOR BUILDER
Join Date: Feb 2005
Posts: 122
I use the same gun with a adjustable knob and it works fine using it to phase the distirbutor,just make sure it's on 0, Hope this helps?
11-11-2007, 12:32 PM
Member
MASTER JOURNEYMAN
Join Date: Dec 2004
Location: Memphis
Posts: 38
make sure you get it right for your application......
I goofed and it cost me about 1000.00 in repairs plus down time
11-11-2007, 03:51 PM
Member
CRAFTSMAN
Thread Starter
Join Date: Sep 2006
Posts: 62
it checked out fine and need no adjustment, thanks for your reply as i did use my gun zero'd out
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off