Hilborn stack injection setup for SBC
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Jul 2009
Posts: 3
Hilborn stack injection setup for SBC
just got an intake for my 360 chevy and need a recomendation for Nozzle size for Alcohol. the motor is 12.5 to 1, .590 lift roller cam, 6500 rpm redline, #0 pump 2-3/16 throat stacks. 2800lb? car with 4.56 gears, 33" tall tires, powerglide with 3200rpm stall. hoping to get 450-500 HP out of the motor
this is my first attemp at mechanical fuel injection and will take any advice available. Thanks guys
Racerroo
this is my first attemp at mechanical fuel injection and will take any advice available. Thanks guys
Racerroo
#4
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
Originally Posted by racerroo1
zipper did i readsomewhere you run 434's? any recomendation on jets?
thanks
thanks
With the "0" pump and 16 AS nozzles is .075, that will put you within .010 either way with a 360" motor. Set the High Speed lean out at 60 lbs on the leak down and if you have an idle bypass set it at 15 lbs. or less.
Zip.