Holley regulators

Old 06-10-2008, 04:30 PM
  #1  
demented
Member
JUNIOR BUILDER
Thread Starter
 
Join Date: Jun 2004
Location: lake luzerne n.y.
Posts: 87
Default Holley regulators

I'm adding a second stage of nitrous to my motor and have come up to the point where I need a second fuel pressure regulator. I have a standard holley fuel regulator that I can use and I see many guys using them. I always thought that there were problems with them. Is this true? Should I have a concern about them? It will be running off of a mallory 250 pump that is just for the nitrous only, and it is going thru a mallory 3 port return regulator. I currently run my pressure up at 12 psi for the first stage because thats how it was set up, but I need to bump the pressure down to 6-7 psi for the second stage. Thats why I'm lookig at the holley regulator. Any thoughts?

Also is there any modifications I need to do to the holley reg. in order to run it?
demented is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -