35 spline alxe free play question
#16
Senior Member
EXPERT BUILDER
Join Date: Jan 2007
Location: atwood,Ky
Posts: 302
just don't make since to me how you can the same diameter axle(35 spline) and have a coarser or finer spline. can someone school me on this because to me in my head if you had the same spine axle(one coarse & one fine) the coase one would have to have a bigger diameter and to me better.mw stuff has to be better than moser right?thanks for any info on this.
#17
Senior Member
MASTER BUILDER
Join Date: May 2003
Location: Owingsville, Ky
Posts: 157
John,
It is the pitch and the angle used to cut the splines that are different. The diameters and the number of splines are the same. Kind of hard to explain, but the "valley" between the splines on some are more narrow which can make the "peak" of the spline a little wider.
Bill
It is the pitch and the angle used to cut the splines that are different. The diameters and the number of splines are the same. Kind of hard to explain, but the "valley" between the splines on some are more narrow which can make the "peak" of the spline a little wider.
Bill