transmission problem

Old 03-04-2012, 03:00 PM
  #1  
srt5091
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Aug 2009
Posts: 4
Default transmission problem

I have a powerglide which I recently rebuilt. We put in a new 588 bbc, and new converter. When motor comes up close to stall, the car breaks loose. won't do it at lower rpm. Any help as to where I should look, please let me know.
srt5091 is offline  
Old 03-04-2012, 03:52 PM
  #2  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default


Just to confirm terminology;
What exactly do you mean by 'the car breaks loose' ?
TheYellaBrick is offline  
Old 03-04-2012, 05:14 PM
  #3  
srt5091
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Aug 2009
Posts: 4
Default

when the transbrake is set and i am trying to stall test the converter the car moves forward at 6000 rpm it will not do it at 5000. i dont know where to look to try and diagnose the problem.
srt5091 is offline  
Old 03-04-2012, 07:48 PM
  #4  
rob41willys
Senior Member
SENIOR BUILDER
 
Join Date: Nov 2007
Location: Tukwila, WA
Posts: 115
Default

How many reverse clutches? sounds like reverse clutches not holding.
rob41willys is offline  
Old 03-05-2012, 03:41 AM
  #5  
srt5091
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Aug 2009
Posts: 4
Default Transmission problems

What I mean is the car trys to move with the brake set, It has 5 clutches in reverse. Thanx
srt5091 is offline  
Old 03-05-2012, 05:22 PM
  #6  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Might correct the problem by re-adjusting the band, instead of backing off 3 1/2 turn try 3 turns.

Just a thought :?:

Zip.
zipper06 is offline  
Old 03-09-2012, 05:58 PM
  #7  
TS1955
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2007
Location: Lost Creek, WV
Posts: 533
Default

Sounds like you might have a worn pump and not producing enough pressure.

TS1955
TS1955 is offline  
Old 03-14-2012, 12:36 PM
  #8  
johnracer
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Default

Did you check what we talked about the other day? If you need any help, you know I'm less than a mile and a phone call away...

Johnny
johnracer is offline  
Old 03-15-2012, 03:47 PM
  #9  
srt5091
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Aug 2009
Posts: 4
Default transmission problems

ok guys, found the problem, it was in the valve body, I fixed it. Thanks for everyones input.
srt5091 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -