Starting Issues
#32
Senior Member
EXPERT BUILDER
Join Date: Mar 2003
Posts: 337
Hammertime, just wondering if your problem ever recurred or did the starter fix it permanently ? Mine appears to be doing the same thing while restarting.
It will spin like crazy until I hit the ignition switch then starts to drag.
(Also a Tilton starter)
Thanks
It will spin like crazy until I hit the ignition switch then starts to drag.
(Also a Tilton starter)
Thanks
#33
Senior Member
RACING JUNKIE
Thread Starter
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
I've never had a problem sense, I had my tilton gone through again at local starter shop, put it back on and it works ok now, he changed a few things in there. I still say it dont work as good as my cheap starter I got from him.
Check for voltage drop first and once you rule out voltage is not a issue look at the starter.
Check for voltage drop first and once you rule out voltage is not a issue look at the starter.
#35
Senior Member
RACING JUNKIE
Thread Starter
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
I do have voltage drop but not much. Your looking for a major drop while cranking, ign on and off back there. I ended up buying a digital ignition and pulling 8 degrees out also. Starter saver would work also, i've used them in the past.