e.t looking for 11's
#1
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
e.t looking for 11's
355
gm forged crank
pro comp i beam forged rods
10:1
world products sportsman 2's 200cc runners 2.05 intake 1.6 ex
.562 .584 lift
290° 300° adv durration
259° 269°@ .050
106° lsa
3200-7200 rpm range
victor jr intake
holley 750 dp
th350
3000 stall
4.88 gears
29 tall tire
3700 lbs
7000-7200 max rpm's
looking for high 11's what do ya think and any advise on getting there?
thanks
-logan
gm forged crank
pro comp i beam forged rods
10:1
world products sportsman 2's 200cc runners 2.05 intake 1.6 ex
.562 .584 lift
290° 300° adv durration
259° 269°@ .050
106° lsa
3200-7200 rpm range
victor jr intake
holley 750 dp
th350
3000 stall
4.88 gears
29 tall tire
3700 lbs
7000-7200 max rpm's
looking for high 11's what do ya think and any advise on getting there?
thanks
-logan
#5
Senior Member
RACING JUNKIE
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
my bro runs a 355 in his vega with eagle rotating assmby and hogged out edelbrock heads and two speed glide/ 4500 stall... 488 gears ... 32in tire... it ran a best of 10.37 in the 1/4 and low 1.30's 60 foot times
#7
Senior Member
RACING JUNKIE
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
Originally Posted by hotrod1994
yeah im thinking i gotta put the car on a diet.....it a street car as well so how would the 3800 stall work on the street?
thanks-logan
thanks-logan
i ran a 3800 stall in my street camaro but with 411 gears and a turbo 400 trans