TWIN FOURS OR BUGCATHER HAT ON A RAM
#1
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Oct 2005
Location: Wellington , New Zealand
Posts: 122
TWIN FOURS OR BUGCATHER HAT ON A RAM
Just want your guys opinion.I have a 632 N/A motor with ported BB3 Xtra Brodix heads,15.5C/R. Whats better? Twin Dominators on a ram or direct injection Bugcatcher hat on a ram? Ive heard mixed opinions and i want to settle it.
#3
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Injection
The Bug Is NOT Large enough for yout application!I would Not even thing of a Carb after having Injection!!!
Put a Bird on and BE HAPPY!
I just so happen to know someone with a POLISHED Magneisium Bird!
Later
G 8)
Put a Bird on and BE HAPPY!
I just so happen to know someone with a POLISHED Magneisium Bird!
Later
G 8)
#4
Senior Member
EXPERT BUILDER
Join Date: Jun 2005
Location: potash country
Posts: 262
On my Altered I run a Bird Catcher on my 434ci. sbc and it runs great! I would never go with gas because it runs so good,the trottle responce is perfect and you gain about 8 or 9% more power just by running it :wink: Ya there are some draw backs like changing the oil more often and having to drain the system at the end of the race weekend,and I've heard some guys have a hard time starting their cars but I run a primer on mine and I have no issues.
#6
Senior Member
EXPERT BUILDER
Join Date: Jun 2005
Location: potash country
Posts: 262
Bird Catchers have 3 bolts in each butterfly,Bugs have 2
Bug catcher butterfly plate have 2 bolt holes and are 3.681" dia.
Bird catcher butterfly plate have 3 bolt holes and are 4.367" dia.
Bug catcher brass throttle stop shafts are .312"
Bird catcher brass throttle stop shafts are .437"
I'm sure this is correct and that Enderle parts are the same. Check to make sure though. Hope this helps!
Good Vibrations Calf. 1-800-576-7661 www.dragparts.com
Ken Lowe Race Cars Australia 01161-411-699 535
Bug catcher butterfly plate have 2 bolt holes and are 3.681" dia.
Bird catcher butterfly plate have 3 bolt holes and are 4.367" dia.
Bug catcher brass throttle stop shafts are .312"
Bird catcher brass throttle stop shafts are .437"
I'm sure this is correct and that Enderle parts are the same. Check to make sure though. Hope this helps!
Good Vibrations Calf. 1-800-576-7661 www.dragparts.com
Ken Lowe Race Cars Australia 01161-411-699 535