468 Alky motor missing on one side when warm
04-05-2014, 05:38 PM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Sep 2011
Posts: 3
468 Alky motor missing on one side when warm
I have a 468 motor running flying toilet injection, solid roller,.642 lift cam,13-1 compression,brodix 2+ heads,msd6al. Motor runs awesome when cool,after warming to 185+ it will stutter on one side only. Any ideas?
04-06-2014, 02:12 PM
Senior Member
RACING JUNKIE
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,312
Have you pulled plugs to see if you are lean? Are you running it that warm all the time?
Curtis
04-06-2014, 03:51 PM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Sep 2011
Posts: 3
The motor is in a mud truck, I usually will run about 15 gallons and then stop for a while then do it again. I replaced the plugs tghinking I had fouled one.
04-06-2014, 04:09 PM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Sep 2011
Posts: 3
When its below 150* it runs great.
04-08-2014, 10:02 AM
Senior Member
RACING JUNKIE
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,312
What did the plugs show that you pulled out? You can get an experts opinion by checking with Scott Offerman or James Monroe at
http://www.killerrons.com/
Curtis
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off