Engine Build Questions, HP Question, What will it run ??

Old 09-25-2009, 06:31 PM
  #1  
jakedog3
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Jul 2008
Posts: 16
Default Engine Build Questions, HP Question, What will it run ??

I know its just a crap shoot ! But here is what i got so far

-350 4 bolt .40 over hence 357 ( lower end of motor all gm ) I'M THINKIN ITS GOOD FOR 6000 RPM ? CORRECT ME IF I'M WRONG ?
-flattop 4 relief piston
-block has not been decked
-Dart iron eagle 180cc, Heads have been shaved to 58cc,2.02/.1.60
-Torker intake ported to match heads
-( still need to buy a carb )
-No cam yet i'm thinkin hydraulic flat adv.284 and [email protected] somewhere in that range, SOME INPUT WOULD HELP FOR THIS.
- STREET/STRIP

MORE ON THE CAR:
80 malibu
4.10 gears 275-60R15
th350 manual valve body ( still need a stall ) Maybe 2500-3000 ????
hookers with 2 1/2 to flowmaster 40's

HP GUESS ???? 400 MAYBE ? WHAT WILL IT RUN IN THE EIGHTH ?
jakedog3 is offline  
Old 09-26-2009, 05:13 AM
  #2  
JEFF69Z28
Senior Member
DYNO OPERATOR
 
Join Date: Apr 2008
Posts: 496
Default

290-325 hp
mid 14's in 1/4
JEFF69Z28 is offline  
Old 09-30-2009, 02:49 PM
  #3  
chevynovaman
Senior Member
SENIOR BUILDER
 
chevynovaman's Avatar
 
Join Date: Sep 2008
Location: CENTRAL WISCONSIN
Posts: 114
Default

350 HP,, IF YOU HAVE ALL THE PARTS YOU LISTED THAT SHOULD RUN 13.0 TO 13.5 'S EASILY. I RAN A 79 MALIBU BACK IN HIGH SCHOOL WITH ALOT LESS PARTS THAN YOU DO, RAN 14.0 WITH HIGHWAY GEARS.. 1/4 MILE... JUST A GUESS, GOOD LUCK.....
chevynovaman is offline  
Old 09-30-2009, 07:28 PM
  #4  
bowhay
Senior Member
EXPERT BUILDER
 
Join Date: Nov 2008
Posts: 263
Default

350 max prolly like 325, shoud get u into the 12s with that car though. 3000 stall for sure...also go with 3 in exhaust and drop the flows, got with a magnaflow or dynamax ulra flow ul notice a difference
jmo
bowhay is offline  
Old 10-01-2009, 02:00 AM
  #5  
JEFF69Z28
Senior Member
DYNO OPERATOR
 
Join Date: Apr 2008
Posts: 496
Default

I HAVE JUST THE CAM FOR YOU IT IS USED MAYBE 400 STREET MILES AND 20 1/4 MILE PASSES ON IT.
COMP CAMS,PART# 12-250, 284/296DURATION, 507/510 LIFT AND LIFTERS.
FLAT TAPPET CAM.
MAKE ME AN OFFER.
JEFF69Z28 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -