New Dart SHP Block
#1
Administrator
RACING JUNKIE
Thread Starter
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
New Dart SHP Block
Ok Guys give your thoughts on the New Dart SHP Block...
Give your Good,Bad,Ugly of this New Block ( Small Block)
How much do you think it can handle etc...
Give your Good,Bad,Ugly of this New Block ( Small Block)
How much do you think it can handle etc...
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
#2
Senior Member
EXPERT BUILDER
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Re: New Dart SHP Block
Originally Posted by bjuice
Ok Guys give your thoughts on the New Dart SHP Block...
Give your Good,Bad,Ugly of this New Block ( Small Block)
How much do you think it can handle etc...
Give your Good,Bad,Ugly of this New Block ( Small Block)
How much do you think it can handle etc...
We built a Procharger engine a couple of months ago that made just over 700 horse and no issues and Dick Maskins told me 2 months ago they had one higher then that and no issues I don't remember the exact number but it was higher then what I had.
Here are some links to lool over
http://speedtalk.com/forum/viewtopic.php?t=10758
http://speedtalk.com/forum/viewtopic.php?t=12112
#3
Administrator
RACING JUNKIE
Thread Starter
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
Hink do ya think it could handle 1,000 to 1,100 ?..i know this is probably stretching it.
I am also in the early process of building Procharger engine...going for the 1,000 to 1,200 hp range with the F-series intercooled Blow thru ( air to Air)
Got my rotating assembly...now shopping for a aftermarket Block.
I am also in the early process of building Procharger engine...going for the 1,000 to 1,200 hp range with the F-series intercooled Blow thru ( air to Air)
Got my rotating assembly...now shopping for a aftermarket Block.
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
#4
Senior Member
EXPERT BUILDER
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Originally Posted by bjuice
Hink do ya think it could handle 1,000 to 1,100 ?..i know this is probably stretching it.
I am also in the early process of building Procharger engine...going for the 1,000 to 1,200 hp range with the F-series intercooled Blow thru ( air to Air)
Got my rotating assembly...now shopping for a aftermarket Block.
I am also in the early process of building Procharger engine...going for the 1,000 to 1,200 hp range with the F-series intercooled Blow thru ( air to Air)
Got my rotating assembly...now shopping for a aftermarket Block.
I have one with a 4.1255 bore, 350 mains , 9.000 deck, .904 lifter bores and will sell the for 2395.00 and ship free in the U.S. if that helps let me know.
Carl