cepx111

Man you build beautiful dragsters.

I'm guessing it will run somewhere in the low 4.60's to high 4.50's

Goodluck! Charles

Racefab57

David, fantastic looking dragster!!! Good luck this year!! David.

I972Nova

David the car looks AWESOME!!! One of my friends has a similar setup with a 572 that made just under a 1000 hp and it ran a best of 4.69...

Your attention to detail is second to none!!!

Good luck this year!!!

Josh

Tod74

I second that..a friend of mine has a 400 ci sm block with I THINK 11x brodix and he has the Terminator set up on his..runs 4.90's

his is a 2001 Spitzer slip tube car. can't remember the wheelbase

That car is beautiful...love the purple.

hammertime

Hey guys just a update
Went testing last night
16mph head wind (yes 16mph) 2550ft DA

1st L 2nd L 3rd *R 4th L

60- 1.094 1.095 1.102 1.089

330- 3.140 3.137 3.146 3.132

1/8- 4.869 4.859 4.880 4.854

MPH- 141.77 142.42 141.73 142.31

1000 6.359

1/4 7.648

MPH 173.11

hammertime

I plan on going again tomorrow to test
I think convertor is a bit off shifted @ 7200 fall back was 6250, 1/8th rpm 6500 1/4 7050 rpms, which is a bit more fall back then I want and not enough rpm at the stripe. I am going to put my spare convertor in there and try it.

Plus side is that I had no problems at all, the car was deadly to the 1/8th for a tt wed night. The front suspension is awesome to say the least !! The new muncie dragway was very smooth !!

hammertime

Just a Update

4.78@145 7.55@177 so far. Loose converter seems to be coming into play here, 60ft is only 1.106-1.11 these ET's should be showing 1.06-1.07 60's.

I hope this is the answer, B&M 8" Converter to tighten things up a bit.

itsabird

just looking at the short time, i would say there,s more in it. but still that,s a good number.

BEAST477

Hey David, nice looking dragster. I see you ran at my home track on the 5/10 wonder if you were planning on being there 5/24-5/25? If so I'll look you up and introduce myself. We talked a few times on here awhile back. Mike