Regulator type(s)

Old 10-23-2008, 05:08 AM
  #1  
lsrholder
Member
JOURNEYMAN
Thread Starter
 
Join Date: Nov 2006
Posts: 31
Default Regulator type(s)

:? Need some input here fellas. 406-SBC 6-700 hp, gas altered roadster, single 4150 (1000 AED ) 1/4 miler, fuel tank up front, -10 lines back thru stainless filter (12" long). Previously had Hilborn stack injectors.

Ok, planning on using a Holley blue pump, as that has enough flow. Question is.... do I regulate psi "before" carb or get the bypass regulator and bypass "after" the carb. Have 2 -06 return lines that went to cell from injection, I could use.

Lots of opinions/ideas here, so give a guy some help on his "fooling" problems..................

Thanks a bunch
lsrholder is offline  
Old 10-23-2008, 10:24 AM
  #2  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

I wouldnt run a return with that setup it doesnt require one. If you had a belt drive or a higher output pump then yes maybe. You'll be fine without the return.
hammertime is offline  
Old 10-23-2008, 10:56 AM
  #3  
lsrholder
Member
JOURNEYMAN
Thread Starter
 
Join Date: Nov 2006
Posts: 31
Default

David.... thank you very much, just what I needed to know !
lsrholder is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -