5.3 ls

Old 01-13-2013, 06:25 PM
  #1  
hotrod1994
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default 5.3 ls

5.3 out of a 01 chevy 1500
gonna run an ms3 cam 237/242 .603"/.609" 112lsa
can i mill the heads down .030 for more compression without having to fly cut the pistons
-thanks logan
hotrod1994 is offline  
Old 02-14-2013, 05:14 PM
  #2  
todd8525
Junior Member
JOURNEYMAN
 
Join Date: Feb 2012
Location: london Ont.
Posts: 25
Default milled heads

a buddy has a 02 5.3 in a 68 nova.and has the 243 heads plained .030 used a .040 gasket his motor is 9.9cr.very simular cam but bought cam and pushrods as set allways check before assembly.
todd8525 is offline  
Old 05-24-2013, 07:25 AM
  #3  
chevynovaman
Senior Member
SENIOR BUILDER
 
chevynovaman's Avatar
 
Join Date: Sep 2008
Location: CENTRAL WISCONSIN
Posts: 114
Default LS

Logan,

The 6.0 I put together has a .612 lift cam with no head milling, and I had alot of room to play with yet but always check the clearance... Ryan
chevynovaman is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -