Any advice on how to scale a Dirt Car
#2
Member
MASTER JOURNEYMAN
Join Date: Dec 2005
Location: Building shelves for wally's
Posts: 36
On a street stock these #'s may be hard to get, a lot of times your 50.5 or so on the left and less than 50% rear but here a few #'s to shoot for.
53% of total on the left side.
52% of total on the rear if possible.
Left rear around 100 lbs heavier than right rear
Frame heights should be 1/2" higher on right front than the left front and 1.5" higher in the rear than front
1" tire stagger across the front and 1.5" - 2" across the rear.
Hope you can run jack bolts on the springs.
Mark
53% of total on the left side.
52% of total on the rear if possible.
Left rear around 100 lbs heavier than right rear
Frame heights should be 1/2" higher on right front than the left front and 1.5" higher in the rear than front
1" tire stagger across the front and 1.5" - 2" across the rear.
Hope you can run jack bolts on the springs.
Mark