yet another motor oil with high zinc content

Thread Tools
 
Old 01-03-2008, 02:06 PM
  #1  
rabiddawg
Senior Member
DYNO TECH
Thread Starter
 
Join Date: Aug 2007
Location: Colebrook Connecticut
Posts: 425
Default yet another motor oil with high zinc content

www.bradpennracing.com
rabiddawg is offline  
Old 01-04-2008, 12:39 PM
  #2  
bubbabbc
Member
JUNIOR BUILDER
 
Join Date: Jun 2003
Location: ny
Posts: 85
Default the best oil

Brad Penn oil is highly recommended by numerous well-respected cam grinders.
bubbabbc is offline  
Old 01-04-2008, 01:15 PM
  #3  
tcarda
Senior Member
MASTER BUILDER
 
Join Date: Aug 2003
Location: Big Lake, Minnesota
Posts: 162
Default

I started using that oil this past summer and I am extremely happy with it. Just kinda funny pouring in green oil.
tcarda is offline  
Old 01-04-2008, 02:46 PM
  #4  
lanham
Senior Member
MASTER BUILDER
 
Join Date: Dec 2005
Location: berea,ky
Posts: 184
Default lucas

I talked with Lucas Oil today about their oil stabilizer and asked if it had zinc in it and they told me no but it has other stuff in it that makes up for the zinc to help lubricate.What is everyones thoughts on this.
lanham is offline  
Old 01-05-2008, 04:42 AM
  #5  
bubbabbc
Member
JUNIOR BUILDER
 
Join Date: Jun 2003
Location: ny
Posts: 85
Default

Save your money and your engine. Go with the Brad Penn oil.
bubbabbc is offline  
Old 01-05-2008, 09:25 AM
  #6  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

Check out this site.
http://www.bobistheoilguy.com/images/lucas/lucas.htm
jmarksdragster is offline  
Old 01-06-2008, 02:26 PM
  #7  
lanham
Senior Member
MASTER BUILDER
 
Join Date: Dec 2005
Location: berea,ky
Posts: 184
Default lucas

I don't know about Bob the oil guy and his demonstration but i have used the Lucas oil stabilizer in my semi for a few years now.I use it in the rearends,engine, transmission and mix it 50/50 with gear oil and run it in the trailer hubs.Sure i was hesitant to use it at first but when i first tried it i noticed that my oil temp ran a little cooler and that alone told me it had to help.As far as the rearends go i run 80/90 gear oil mixed with the Lucas.So one day me and a buddy was running together and his truck has synthetic gear oil in the rearends and i asked him what temp his rearends was running and mine was running the same as his with the synthetic oil.This is my experience with the product.As far as Bob the oil guy goes doesn't all oils drain back into the pan because if they don't this is news to me.
lanham is offline  
Old 04-04-2019, 03:32 AM
  #8  
mallenwase
Junior Member
SHOW GUEST
 
Join Date: Apr 2019
Posts: 1
Default

I would suggest you to use Brad Penn oil it is highly recommended by numerous well-respected cam grinders, we also have been using for a long time in a towing truck of Blocked Driveway Towing Brooklyn, and very satisfied with the performance. it will never disappoint you.
mallenwase is offline  
Old 07-04-2023, 12:23 PM
  #9  
ssikolc
Junior Member
SHOW GUEST
 
Join Date: Dec 2021
Posts: 6
Default

I was just checking the benefits of zinc in oil. Must say this is excellent information and I learnt why I should be putting extra zinc in my older gm or converting it to a roller cam.
ssikolc is offline  
Old 08-23-2023, 08:14 AM
  #10  
annamarks
Member
MASTER JOURNEYMAN
 
Join Date: Jan 2023
Posts: 44
Default

I started using that oil this past summer and I am extremely happy with it. Just kinda funny pouring in green oil.

Last edited by annamarks; 08-23-2023 at 09:00 AM.
annamarks is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -