thoughts on engine build
12-11-2021, 10:32 AM
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Dec 2021
Posts: 1
thoughts on engine build
582 BB dart 9.800 block callies 4.375 crankshaft , callies 43406.385 rods racetech pistons with gas ports setup for nitrous, tool steel wrist pins, total seal 043 stainless rings, billet rail oil pan and valve covers, brodix full cnc ported head hunter 385 heads, manley valves, PAC triple springs, jesal soild body HD rockers and one piece rocker system, jesel belt drive 904 BAM lifters,custom comp .900camshaft manley165 wall pushrods, full ported victor JR, holley sniper , msd billet distributor msd crank trigger arp studs, speedtech annular stainless tech 1 pro mod nitrous system150-450
04-07-2022, 08:09 AM
#2
Member
JOURNEYMAN
Join Date: Sep 2021
Posts: 31
Engine models are available online but I'm not sure about a 2 cylinder. If you are just curious about how one works I would recommend a lawn mower engine. You shouldn't have problems finding one and most can be disassembled with a cheap socket set. There are TONS of videos on Youtube that explain small engine repair in detail. Have fun!!
04-22-2022, 02:04 AM
#3
Junior Member
APPRENTICE
Join Date: Dec 2021
Posts: 10
Last edited by GSI_114893928742681855241; 04-24-2022 at 04:59 AM.
