621

Old 07-02-2011, 07:15 AM
  #1  
markdunlap
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Jan 2004
Location: central Illinois
Posts: 459
Default 621

My 622" had 14.5 degree EPD/Brodix Pontiac style heads with 460 CC intake ports that flowed 480+cfm and 2.45" intake valves.

On a true Chevy Head RFD/Edelbrock heads are some of the best flowing.

That being said, if I already had a good set of Big M 410 cc heads, I would perobably use them if the pistons were compatable and then get a custom cam designed for that combo. A good intake sized for that size engine would be a plus too.
markdunlap is offline  
Old 07-03-2011, 06:27 AM
  #2  
markdunlap
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Jan 2004
Location: central Illinois
Posts: 459
Default 621

Sorry, my post was supposed to be for the guy asking about heads for a 621.
OOOPS.
markdunlap is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -