aluminum verses steel ros on blower motor

Old 12-14-2008, 07:59 PM
Junior Member
Thread Starter
Join Date: Jan 2004
Posts: 5
Default aluminum verses steel ros on blower motor

what is your opinion on using h beam rods verses aluminum rods on hp over 1150?
prince is offline  
Old 12-15-2008, 12:00 AM
Senior Member
Join Date: Jan 2006
Location: La.
Posts: 2,890

On a blower motor, i think and use alum rods. I got BME 5.850's in my 383" that put's the piston .025 down with a 9.000 deck, with a 1471 on alcohol, that's the only motor i have that will produce 1100 HP i think Alum rods absorb the impact a little softer therefore easier on the crank and bearings, but my other unblown S/BLK's have "H" beams or Lonatti promod rods.


zipper06 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -