rollout??
#2
it could give you problems by pulling to one side....
you can make up some of the difference by taking the 97 roll out tire and putting the air to it and letting it sit for a while..you are actually stretching the tire..it will work..
brian
you can make up some of the difference by taking the 97 roll out tire and putting the air to it and letting it sit for a while..you are actually stretching the tire..it will work..
brian
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
#4
Put an extra 10-15 lbs in it and leave it for a couple of hours then let it down to the same pressure as the other one and recheck the roll out. I think the most difference you want is 3/4 inch but I usually try to get mine within 1/4. This will only work on new tires, once you run them it doesn't work.