Evaporating Race Gas

Old 07-27-2009, 05:03 PM
  #1  
landon718
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Sep 2007
Posts: 15
Default Evaporating Race Gas

I am currently running a 502 with just under 10to1 comp. The vehicle is a full size blazer set up for side by side mud drags. The VP rep suggested going with their new oxygenated race gas. I am having problems with this gas evaporating as it goes into the intake. I made my first pass on Sunday and at the end of the track I let off the gas and it stuttered and quit. I first thought I lost an ignition box or coil or spark related when it wouldn't fire back up. I checked all that and everything is fine. I could pump the dominator over and over and the gas would evaporate before it reached the cylinder. The plugs were dry. I let it cool for a couple hours and it fired right up. Did I get a bad batch of gas or is this gas not designed for my application or is something else? Thanks for any and all help.
landon718 is offline  
Old 07-27-2009, 05:43 PM
  #2  
TheRabbit
Senior Member
RACING JUNKIE
 
TheRabbit's Avatar
 
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,276
Default

Tell me more about your 502. Are you running Q16? If so you don't have near enough compression for it. To run Q or oxygenated fuel you have to richen it by at least 5% or your gonna be WAY LEAN. I run Q16 and LOVE IT!! I went up 5 jet sizes and I was already running over 1600cfm's. The Q fuel isn't gowing to evaporate any quicker it just has more oxygen content which makes it burn faster therefore needs to be richer.

Also tell me about the end of the run. Bumpy, rough track? If so, were you off the throttle when you went over the bumps / bouncing. What I'm getting at is it's easy to bounce around alot and flood a dominator and that's what it sounds like to me by the limited info you gave us.
TheRabbit is offline  
Old 07-28-2009, 06:37 PM
  #3  
JimmySmith
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: Batesville Ms.
Posts: 167
Default fuel

With 10 to 1 you would use 113 in VP IF you want to use oxygenated fuel
and you would step up bout 2 jet sizes if you were right on the regular race fuel Later J.Smith 4621 racing
JimmySmith is offline  
Old 07-29-2009, 11:18 PM
  #4  
chevyfireball
Senior Member
MASTER BUILDER
 
Join Date: Dec 2005
Location: Napier, New Zealand
Posts: 231
Default

Oxygenated fuel is more trouble then its worth. Give it a sheetload of nitrous man!
chevyfireball is offline  
Old 09-07-2009, 09:48 AM
  #5  
landon718
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Sep 2007
Posts: 15
Default

Originally Posted by TheRabbit
Tell me more about your 502. Are you running Q16? If so you don't have near enough compression for it. To run Q or oxygenated fuel you have to richen it by at least 5% or your gonna be WAY LEAN. I run Q16 and LOVE IT!! I went up 5 jet sizes and I was already running over 1600cfm's. The Q fuel isn't gowing to evaporate any quicker it just has more oxygen content which makes it burn faster therefore needs to be richer.

Also tell me about the end of the run. Bumpy, rough track? If so, were you off the throttle when you went over the bumps / bouncing. What I'm getting at is it's easy to bounce around alot and flood a dominator and that's what it sounds like to me by the limited info you gave us.
I am running 113. Dart pro 1s, je pistons and edelbrock super victor. The end of the run was a bit bumpy and was off the gas when it died but it wasn't flooded. We checked the plugs and they were dry as a bone. Even after pumping the crap out of it the thing still wouldn't fire and plugs were dry and I did have spark.
landon718 is offline  
Old 09-07-2009, 10:05 AM
  #6  
TopspeedLowet
Senior Member
DYNO OPERATOR
 
Join Date: Apr 2008
Posts: 504
Default

Originally Posted by chevyfireball
Oxygenated fuel is more trouble then its worth. Give it a sheetload of nitrous man!
I agree on the trouble aspect 100% for my own stuff. Sounds like it must be getting closer to NO2 time for you in the southern hemisphere is it not? It sure sounds like it with that sound performance advice. I hope you rotate the earth again this season.
Bruce
TopspeedLowet is offline  
Old 09-07-2009, 04:40 PM
  #7  
TheRabbit
Senior Member
RACING JUNKIE
 
TheRabbit's Avatar
 
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,276
Default

Originally Posted by TopspeedLowet
Originally Posted by chevyfireball
Oxygenated fuel is more trouble then its worth. Give it a sheetload of nitrous man!
I agree on the trouble aspect 100% for my own stuff. Sounds like it must be getting closer to NO2 time for you in the southern hemisphere is it not? It sure sounds like it with that sound performance advice. I hope you rotate the earth again this season.
Bruce
I'm glad some guys think this way so I will always have an advantage over them!! I will never run a non oxygenated fuel again!!
TheRabbit is offline  
Old 09-07-2009, 04:47 PM
  #8  
TheRabbit
Senior Member
RACING JUNKIE
 
TheRabbit's Avatar
 
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,276
Default

Originally Posted by landon718

I am running 113. Dart pro 1s, je pistons and edelbrock super victor. The end of the run was a bit bumpy and was off the gas when it died but it wasn't flooded. We checked the plugs and they were dry as a bone. Even after pumping the crap out of it the thing still wouldn't fire and plugs were dry and I did have spark.
The fuel is not the problem. (Unless it has water in it) I had a similar issue last week and found the distributor cap and rotor were bad. It was very hard to start. When it did start it ran like a tunna boat and acted just like it was running out of gas.
I would check and make sure you're getting fuel into the intake and make sure you're getting plenty of fire. If it is it will start. ( if compression is not low of course)
TheRabbit is offline  
Old 09-14-2009, 06:25 PM
  #9  
jaxsmith
Member
MASTER JOURNEYMAN
 
Join Date: Jan 2008
Location: Brandon MS
Posts: 47
Default

Sunoco Standard 110 octane or at the most Sunoco Supreme 112 octane and run from the oxygenated fuels unless you want to be very carefull with handling and fuel system care. The key element in "oxygenated fuels" is about 20 percent ethanol.
jaxsmith is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -