worn brass dist gear

Thread Tools
 
Old 01-21-2015, 02:30 PM
  #11  
HiredGun7
Junior Member
SHOW GUEST
 
Join Date: Dec 1969
Posts: 4
Default

Not my picture but this shows the idea perfectly. I use a triangle shaped file and cut the slot about .020" deep. Time the groove so the oil goes onto the gear right before it meshes with the cam.
HiredGun7 is offline  
Old 06-04-2021, 01:51 AM
  #12  
eerode
Banned
APPRENTICE
 
Join Date: May 2021
Posts: 10
Default

Originally Posted by scott0408 View Post
running a 421 sbc after a year of
Originally Posted by scott0408 View Post
Speed Test racing doing some work on it & found the dist gear worn not extremly bad but still makes me worry about it any ideas

. It's not uncommon. You can usually pick that up with a timing light is will show eratic timing when you check the timing. Hope this helps.


Last edited by eerode; 06-04-2021 at 01:58 AM.
eerode is offline  
Old 12-24-2021, 10:52 PM
  #13  
bencomputernews
Junior Member
SHOW GUEST
 
Join Date: Dec 2021
Posts: 1
Default

toi hieu ban
bencomputernews is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -