finally
#12
Senior Member
DYNO OPERATOR
Thread Starter
Join Date: Feb 2009
Posts: 510
that's my wifes creeper. The wheels fell off of mine.
Got the shocks mounted last night and the track locator also. Will have more pic's at the end of the weekend. Still need to chaange the front springs. Running out of time, only have one week to finish it.
Got the shocks mounted last night and the track locator also. Will have more pic's at the end of the weekend. Still need to chaange the front springs. Running out of time, only have one week to finish it.
#14
Senior Member
DYNO OPERATOR
Thread Starter
Join Date: Feb 2009
Posts: 510
thanks. I needed to do about 2" of welding last night, as soon as I struck an arc, I ran out of wire. Home Depot is only 4 miles away, but the traffic, it took 35 minutes for a round trip. And I was only at the store for 5 of those.
#16
Senior Member
DYNO OPERATOR
Thread Starter
Join Date: Feb 2009
Posts: 510
Went straight the first pass. Took a couple of more runs to get the shocks dialed in. Probably need more runs to fine tune it.
Now it's time to adjust the front end. car would come up on the stops and not settle back down. I would actually bounce the front tires off the ground a couple of times. Gonna try to shorten the stops and adjust the shocks and see what happens.
AND not nap first round,haha.
Now it's time to adjust the front end. car would come up on the stops and not settle back down. I would actually bounce the front tires off the ground a couple of times. Gonna try to shorten the stops and adjust the shocks and see what happens.
AND not nap first round,haha.