member 666
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: Dec 1969
Posts: 14
member 666
Watch what he is selling, sold me heads and claimed they were dart and arent and same as the intake i bought from him suppose to be for a 10.2 deck bbc and is for a 9.8 deck bbc, just watch what you buy from him.
#2
Re: member 666
Originally Posted by arrow76
Watch what he is selling, sold me heads and claimed they were dart and arent and same as the intake i bought from him suppose to be for a 10.2 deck bbc and is for a 9.8 deck bbc, just watch what you buy from him.
Thanks
#3
__________________
Chris
As close to "Normal" as I can get...
Chris
As close to "Normal" as I can get...
#7
Junior Member
APPRENTICE
Thread Starter
Join Date: Dec 1969
Posts: 14
Yes i have and no response, but a lesson learned again. Im not persueing it, heads already at my machine shop try to get set up for my engine and well intake up for sale for a loss.. Not worth my time or efort, just warning others cause see heads still listed and he has other stuff up for sale also.
#8
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
I looked at his other ad and he's advertising a 580" short blk as a tall deck, i couldn't see the front of the blk so i couldn't tell if it was, don't know if he ran those heads on it though. Does the manifold fit the heads with a tall deck/10.2 i know they make tall deck manifolds which are different than short deck, others use spacer plates to use a short deck manifold, just asking.
I just built a 482 short deck for someone that had heads off a tall deck blk, i used stacks injection and had to use .080 manifold gaskets for it to line up.
Zip.
I just built a 482 short deck for someone that had heads off a tall deck blk, i used stacks injection and had to use .080 manifold gaskets for it to line up.
Zip.
#10
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Has anyone sent him a message telling him to come on here ?
What I've seen with some of the dart heads, they sell a lot of blems, could it be possible you may have a dart head thats been ported out to a 380 ?
What I've seen with some of the dart heads, they sell a lot of blems, could it be possible you may have a dart head thats been ported out to a 380 ?