andybyrd

Don't mean to but in on this Post but how do you check to see if your converter is slipping
Thanks Andy

shawnp

Marco Abruzzi is building a fantastic converter at a very, very reasonable price.

johnracer

[((rpm X tire diameter)/(rear end ratio x trans ratio x mph x 336))-1] x 100 or use the caculator on TCI's website......
Johnny

al34

8" TCI 5000

Scooterz

Mine is Blue. It is round & Stalls @ about 3200.

curtisreed

Not typical of bracket racers but we have four Neal Chance converters. 2 bolt together and 2 welded. Marty has been a big help to us every time. They have always performed well and all are very consistent.

Curtis

russ67chevelle

ive heard good news of neal chance converters. marty is over at dragstuff if u guys wanna check that out...

i run a blue (light special) converter too...was told its a sonic(?) i have trust in my trans guy, thats what he sold me, sofar its ok,maybe im sitting on a time bomb...?

car doesnt see alot of time, but when full nitrous is going its about 1100 hp at the crank in a 3000lb car rolling down track

travis91

I see several big names
TSI ,TCI, ATI,BTE, Abruzzi, Coan, Chance, Continental, Hughes, PTC and one round blue one or maybe 2

but I didn't see anyone mention gaines from a previous converter. I also didn't see a major slant for one converter manufacture or another. I was hoping to see a lot more posts so readers can get a feeling for what everyone is running.

Other brands that I know drag racers are running but didn't see any posts for are Edge, JW, FTI, TCS and others.

Keep them coming guys. The more information that is on here the more helpful it will be to all.

Thanks.

spib

I had a b&m holeshot 3600
last yr went to 8"ati mrt treemaster 4500 stall
picked up 3 tenths faster ,3.5 miles mph faster and 60 ft was .08 better
and rpm picked up 600 rpms at the 1320 finish
this is all with a stock 350 and small cam

cam67152

I run a 8" 5500 tcs, there out of Vancouver Can. Great service :!:
http://www.tcsproducts.com/

cam67152