cooling in the pits

Old 11-30-2008, 02:50 PM
  #21  
sg1586
Senior Member
MASTER BUILDER
 
Join Date: Dec 2003
Posts: 185
Default

Did you guys notice what filter is on that glide???

I have been using one of them for a wile now :mrgreen: :mrgreen:
sg1586 is offline  
Old 11-30-2008, 05:32 PM
  #22  
us7race
Senior Member
EXPERT BUILDER
 
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
Default

Originally Posted by sg1586
Did you guys notice what filter is on that glide???

I have been using one of them for a wile now :mrgreen: :mrgreen:
Barry what kind of filter is it?
us7race is offline  
Old 12-01-2008, 08:47 AM
  #23  
sg1586
Senior Member
MASTER BUILDER
 
Join Date: Dec 2003
Posts: 185
Default

Jody it is a Mopar filter with a special made adapter...It works great and alot more filter area....

You can get them from TSR

:lol:
sg1586 is offline  
Old 12-02-2008, 04:01 AM
  #24  
sg1586
Senior Member
MASTER BUILDER
 
Join Date: Dec 2003
Posts: 185
Default

Originally Posted by us7race


That cooling pump also needs the ATI Supercase :shock:
sg1586 is offline  
Old 12-09-2008, 12:34 AM
  #25  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default

I like the nitrous idea, very cool and much cheaper than buying a fancy pump and ATI super case> maybe nitrogen would be cheaper than NOX though. Cp
cepx111 is offline  
Old 01-03-2009, 05:16 AM
  #26  
shawnp
Senior Member
RACING JUNKIE
 
Join Date: Mar 2003
Location: Ohio
Posts: 936
Default

Originally Posted by hammertime
I think its ATI who makes the pump you are looking for but its $800.00
Saw it at PRI. Was told if you don't have 20-30 mintues to cool, then you are wasting your money. The design feature is not for your normal hot lapping bracket car. I think the set up could be duplicated much cheaper.
shawnp is offline  
Old 01-20-2009, 02:46 PM
  #27  
shoedoos
Junior Member
SHOW GUEST
 
Join Date: Jul 2003
Posts: 3
Default

Plumb the lines to the side of the pan using some quick release fittings with one-way valves from a hydraulic shop, use an old Melling oil pump with a drill attached to it and run the trans fluid through a coil of copper line sitting in an ice box - cools a race TH400 in 10 minutes to completely cold....and you can also keep the beer cold if the ice box is big enough....
shoedoos is offline  
Old 01-20-2009, 04:23 PM
  #28  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

We use Weldon high temp pumps for our differential cooling system. The model 9200 is what you want along with a cooler from Summit or Jegs or.....

http://www.weldonracing.com/product/..._Oil_Pump.html

On sale here;

http://www.srmotorsports.com/Weldon_Fuel_Pumps.html

Cooler with fan here;

http://www.jegs.com/p/Perma-Cool/744433/10002/-1
TheYellaBrick is offline  
Old 01-20-2009, 06:52 PM
  #29  
us7race
Senior Member
EXPERT BUILDER
 
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
Default

Originally Posted by shoedoos
Plumb the lines to the side of the pan using some quick release fittings with one-way valves from a hydraulic shop, use an old Melling oil pump with a drill attached to it and run the trans fluid through a coil of copper line sitting in an ice box - cools a race TH400 in 10 minutes to completely cold....and you can also keep the beer cold if the ice box is big enough....
Wouldn't that only cool the fluid in the pan, not the trans and converter?
I think it may help but I think the real heat is in the converter.
us7race is offline  
Old 01-20-2009, 07:00 PM
  #30  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,578
Default

I use nitrous to cool mine does the job quickly :!: :!:
mopar1968 is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -