What converter are you running
#13
Senior Member
DYNO OPERATOR
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Originally Posted by andybyrd
Don't mean to but in on this Post but how do you check to see if your converter is slipping
Thanks Andy
Thanks Andy
Johnny
#16
Not typical of bracket racers but we have four Neal Chance converters. 2 bolt together and 2 welded. Marty has been a big help to us every time. They have always performed well and all are very consistent.
Curtis
Curtis
#17
Senior Member
EXPERT BUILDER
Join Date: Jan 2005
Posts: 336
ive heard good news of neal chance converters. marty is over at dragstuff if u guys wanna check that out...
i run a blue (light special) converter too...was told its a sonic(?) i have trust in my trans guy, thats what he sold me, sofar its ok,maybe im sitting on a time bomb...?
car doesnt see alot of time, but when full nitrous is going its about 1100 hp at the crank in a 3000lb car rolling down track
i run a blue (light special) converter too...was told its a sonic(?) i have trust in my trans guy, thats what he sold me, sofar its ok,maybe im sitting on a time bomb...?
car doesnt see alot of time, but when full nitrous is going its about 1100 hp at the crank in a 3000lb car rolling down track
#18
Junior Member
APPRENTICE
Thread Starter
Join Date: Jul 2007
Location: Gainesville, FL
Posts: 19
I see several big names
TSI ,TCI, ATI,BTE, Abruzzi, Coan, Chance, Continental, Hughes, PTC and one round blue one or maybe 2
but I didn't see anyone mention gaines from a previous converter. I also didn't see a major slant for one converter manufacture or another. I was hoping to see a lot more posts so readers can get a feeling for what everyone is running.
Other brands that I know drag racers are running but didn't see any posts for are Edge, JW, FTI, TCS and others.
Keep them coming guys. The more information that is on here the more helpful it will be to all.
Thanks.
TSI ,TCI, ATI,BTE, Abruzzi, Coan, Chance, Continental, Hughes, PTC and one round blue one or maybe 2
but I didn't see anyone mention gaines from a previous converter. I also didn't see a major slant for one converter manufacture or another. I was hoping to see a lot more posts so readers can get a feeling for what everyone is running.
Other brands that I know drag racers are running but didn't see any posts for are Edge, JW, FTI, TCS and others.
Keep them coming guys. The more information that is on here the more helpful it will be to all.
Thanks.
#19
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
I had a b&m holeshot 3600
last yr went to 8"ati mrt treemaster 4500 stall
picked up 3 tenths faster ,3.5 miles mph faster and 60 ft was .08 better
and rpm picked up 600 rpms at the 1320 finish
this is all with a stock 350 and small cam
last yr went to 8"ati mrt treemaster 4500 stall
picked up 3 tenths faster ,3.5 miles mph faster and 60 ft was .08 better
and rpm picked up 600 rpms at the 1320 finish
this is all with a stock 350 and small cam
#20
Senior Member
MASTER BUILDER
Join Date: Apr 2009
Location: B.C. Canada
Posts: 145
I run a 8" 5500 tcs, there out of Vancouver Can. Great service :!:
http://www.tcsproducts.com/
cam67152
http://www.tcsproducts.com/
cam67152