hotrod1994

ok guys im looking for custom cam grind suggestions for a sbc it has
9.3:1 compression and i want a high lift lift nasty sounding hydrallic flat tappet that will work with my set up

std bore 350
9.3:1 compression would like to run premium 91-93 octane
1.94-1.5 worked iorn heads
torker intake/ but i may upgrade to a knock off of the victor jr
holley 750 (yes it's a little big)
mallory unilite and mallory hyfire 6 ignition

it will have a th 350 behind it with a 3000 stall converter
4.11 gears

im looking for a high lift nasty sounding cam that will work good with my set up and make lots of power through from abot 2,500/3,000-6,000

im open to any help or suggestions

thanks logan

doorjammer

look at comp cam.........thumpr cams

markdunlap

Just installed a Mutha Thumper Hydaulic roller in a 377 SBC street/Strip Nova.

It does sound REALLY GOOD at idle. Also has enough vacuum for power booster on brakes.