going from gas to alky
#3
Senior Member
EXPERT BUILDER
Join Date: Jul 2005
Location: Wylie,Texas
Posts: 276
Yes it is easy! Just a big piece of advise. If you are currently running gas from a plastic fuel cell , REMEMBER if it has foamy looking baffle in there make sure you take it out. If you dont the alcohol will turn it to jelly and gum up everything!!! Don
#4
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Originally Posted by davis419b
Yes it is easy! Just a big piece of advise. If you are currently running gas from a plastic fuel cell , REMEMBER if it has foamy looking baffle in there make sure you take it out. If you dont the alcohol will turn it to jelly and gum up everything!!! Don
Very easy to do, I think alky dominator will be to big though.
www.apdracing.com one of the best carb shops anywhere !!
#6
Member
JUNIOR BUILDER
Join Date: Sep 2005
Location: East Texas
Posts: 86
Originally Posted by jmarksdragster
BLP carbs is another. Very good work, been in business a LONG time and they make almost everything in house. They also supply a lot of other companies with components for Holleys.
-Tanner
#7
Member
JUNIOR BUILDER
Join Date: Sep 2005
Location: East Texas
Posts: 86
BLP also carries a belt drive fuel pump with an internal resevoir (sp?) and fuel regulater. This means no inline regulator is necessary, and no return line to the fuel cell is needed. This piece is the cat's a$$!
-Tanner
-Tanner