QA1 Double adjustable shocks for rear

Old 04-03-2011, 10:34 AM
Junior Member
Thread Starter
Join Date: Oct 2003
Posts: 1
Default QA1 Double adjustable shocks for rear

I have installed a pair on my drag car and looking for a starting ponit....Car is a 70 nova with 540 aprox 800 hp and around 3400 lbs with driver...ladder bar setup, transbrake...rear weighs 1740#..i have 170# springs...if anyone is running these shocks any help appreciated..thanks
rhino502 is offline  
Old 04-12-2011, 05:21 AM
Senior Member
TheRabbit's Avatar
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,295

Since nobody has replied yet. I run the same shocks. Personally I think the 170lb springs are too stiff. My truck is 2,800lbs and even the 150lb springs unload the rear after about 100' feet. (I'm over 1,220hp.) I run 110's.
But to answer your question a lot depends how hard you launch. I would start with compression and rebound half way and go from there. Every vehicle is different so it's gonna be trial and error for a few passes.
TheRabbit is offline  
Old 04-12-2011, 05:54 AM
Senior Member
Join Date: Jan 2006
Location: La.
Posts: 2,890

X2 on the springs being too heavy, my car weighs 3250 lbs with a 4 link setup, and i run 130 lb springs with the QA1's. I don't remember the scaled rear weight, but it was somewhere near your's, with a sm/blk in my car.


zipper06 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -