Cam info for Reed SBC roller
#1
Senior Member
DYNO OPERATOR
Thread Starter
Join Date: Jan 2004
Location: central Illinois
Posts: 459
Cam info for Reed SBC roller
I asked this before, but asking again.
I have a Reed SBC roller cam that I would like to sell but have no duration specs or cam card.
Can anyone identify or send me to where it is listed?
R300-306UX-6A2
I measured lobes and came up with .630" lift for 1.5 ratio rockers. I figure it is 106 lobe seperation.
I can put it in a block and get the .050" lift duration but don't have a SBC block here today.
I have a Reed SBC roller cam that I would like to sell but have no duration specs or cam card.
Can anyone identify or send me to where it is listed?
R300-306UX-6A2
I measured lobes and came up with .630" lift for 1.5 ratio rockers. I figure it is 106 lobe seperation.
I can put it in a block and get the .050" lift duration but don't have a SBC block here today.