recomendation

Old 08-02-2009, 04:36 PM
  #1  
wildo23
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2005
Posts: 3
Default recomendation

hi i have the camaro z28 1986the car weight 2450 with me,the car runs 8.87 a 153 mph seg 1/4 miles and the 1/8 5.65 the 60ft1.24.the motor is 540 piston 14to1 the block bored 4.5 rods 6.535 the roller cam 800 lift the heads 320 intake carburetor 1150 and thew converte stall 5800.I boot 5200 with transbrake and change 7400.the transmssion powerglide planetary 1.80 and the gear 4.56.you think the engine is new and just have 2 pass that I recommended that I do I was thinking to change the gear to boot longer.thanks
wildo23 is offline  
Old 08-02-2009, 05:33 PM
  #2  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,312
Default

wildo I think something may be getting lost in translation. Are you asking if you should change the rear gear to a higher numerically gear??

Curtis
curtisreed is offline  
Old 08-02-2009, 05:56 PM
  #3  
wildo23
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2005
Posts: 3
Default hi

yes ,maybe change the gear 4.86 what recomendation
wildo23 is offline  
Old 08-02-2009, 06:44 PM
  #4  
chrisr
Senior Member
MASTER BUILDER
 
Join Date: Jul 2004
Location: Elm Mott, Texas
Posts: 197
Default

From what I understand you are shifting at 7400. What are you crossing the line at? Also, where did you determine your shift point: dyno reading or ???
chrisr is offline  
Old 08-03-2009, 07:52 AM
  #5  
wildo23
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2005
Posts: 3
Default h

Originally Posted by chrisr
From what I understand you are shifting at 7400. What are you crossing the line at? Also, where did you determine your shift point: dyno reading or ???
shifting at 7700 in 1/4miles
wildo23 is offline  
Old 08-03-2009, 08:33 AM
  #6  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,312
Default Re: h

Originally Posted by wildo23
Originally Posted by chrisr
From what I understand you are shifting at 7400. What are you crossing the line at? Also, where did you determine your shift point: dyno reading or ???
shifting at 7700 in 1/4miles
What is your finish line RPM now with the 4.56 gear?
curtisreed is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service