350 STOCK bottom end with 9.75:1 compression 1.94 1.5 cast heads milled .030 to get the compression ratio up erson 488/488 cam 232/234 duration at .050 280/290 advanced duration 108 lsa Mallory hyfire 6 and Mallory unilight distributor
what should i cut it off at it at ld like to be on the safe side i was think 6,000 would be alright
will be in a camaro with th 350 2200 stall stage 2 shift kit and 4.56 gears out back gonna run it 1/4 mile to see what it will do just wondering what you guys think on the rpm's
my 383 in my vega is all stock on bottom end and a set of alum factory 1.94 vette heads with no work done to them and keith black pistons ... i have 31x14.5 and 456 gears with a glide turning 6900 to 7k in the 1/4 :wink: i cringe everytime i run but she not showing any signs of failure.... still got almost 80 psi of oil pressure