View Poll Results: aluminum rods in a street motor??
Voters: 19. You may not vote on this poll
street killer or time bomb?
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: May 2006
Posts: 14
street killer or time bomb?
alright guys here we go i just took apart a 377 sbc splayed caps good light weight pistons all good parts and to my suprise it has aluminum rods in it now my question is or i guess statement is give me some input on aluminum rods for street use this is in my street car and when i say street car i mean i hit a dozen or so car shows a year and maybe the track a time or two small tire car glide 5k converter older superstock cam may even be a older superstock motor aluminum heads doesnt get hot i drove it alot last year not having any idea what was in the motor ran and drove great good street manners for a 276 @50 cam im tempted to have the rods checked n put em rt back in there they are venolias and evrything in the motor looked excelent give me some input please im kinda at a loss here
#2
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
I personally would not worry about Alum. rods on the street as long as the motor runs cool and the oil pressure stays up. I would run Alum rods on every motor i have if i didn't have to grind half the pan rails away, i luv them and my first set of Alum. rods was in 1964, that's right 47 yrs. ago.
JMO
Zip.
JMO
Zip.