350TH to 700R4 Swap

Old 01-20-2009, 06:15 AM
  #1  
ejohnson03
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Nov 2006
Location: Grosse Ile, MI
Posts: 6
Default 350TH to 700R4 Swap

Hello all...

I have a 1976 Chevy Impala Custom with a stock 350TH tranny. My 383 Stroker (est. 500hp) will be completed in a few weeks, and I would like to swap out the 350TH for a 700R4. Stock rear has been changed to a 8.5" 10 bolt 3.73 POSI.

Question 1: Can any one recommend a reliable Performance Transmission builder in my area (Downriver, Michcigan)?

Question 2: Will I need to have my Driveshaft shortened or the Trans support bracket changed out?

Thank you for your feedback.
ej
ejohnson03 is offline  
Old 01-20-2009, 10:17 AM
  #2  
shawnp
Senior Member
RACING JUNKIE
 
Join Date: Mar 2003
Location: Ohio
Posts: 936
Default

I think you would be better off with the TH350 but I would ask an expert on that. Call Dion Vickers. He will help you out. Tell him I told you to call. 330-584-3679.
shawnp is offline  
Old 01-23-2009, 10:47 AM
  #3  
W31350
Junior Member
APPRENTICE
 
Join Date: Dec 2007
Posts: 11
Default Re: 350TH to 700R4 Swap

Originally Posted by ejohnson03

Question 1:

Question 2: Will I need to have my Driveshaft shortened

YES

or the Trans support bracket changed out?

YES
W31350 is offline  
Old 01-24-2009, 06:05 PM
  #4  
I972Nova
Senior Member
EXPERT BUILDER
 
Join Date: Aug 2007
Location: Orient, OH
Posts: 384
Default

500hp + Heavy car + 700r4 = Parts flyin.

I have never had any luck with 700r4's.

I would suggest building the 350 turbo up.
I972Nova is offline  
Old 01-24-2009, 06:52 PM
  #5  
ejohnson03
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Nov 2006
Location: Grosse Ile, MI
Posts: 6
Default Which Tranny

Well...

I had considered the 700R4 based on the lower gear ratio in First, and the overdrive gear for highway cruising.

Since my highway miles will be very limited, the 350 could do if I can get it to hold up to the extra HP.

The biggest task then becomes finding a reputiable source locally to get a Built up 350TH.

Especially after reading about Mad Dog or who ever they are now...

Thanks for your posts.
ej
ejohnson03 is offline  
Old 01-24-2009, 07:03 PM
  #6  
dparker
Senior Member
RACING JUNKIE
 
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Default

If you can get a core you might think about building a turbo 400. More parts available and even tougher than the 350. Just and idea.
dparker is offline  
Old 01-25-2009, 07:15 AM
  #7  
onedragracer
Member
JUNIOR BUILDER
 
Join Date: Aug 2007
Location: Odessa Texas
Posts: 81
Default

You can build a bullet proof 700R4, but it is very expensive. Your looking to spend around 2500 to 3000 for trans and converter.
You should look into a 4L80E.
onedragracer is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -