AFTERMARKET STEERING
#2
Senior Member
DYNO OPERATOR
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
You'll need to clarify exactly where this bolt is going. The ONLY place I'd use a 1/4" bolt on the steering would be to retain the u-joint to the shaft or the shaft to the gear....the knuckle thing has me confused.....easy to do by the way
Johnny
Johnny
#3
Originally Posted by johnracer
You'll need to clarify exactly where this bolt is going. The ONLY place I'd use a 1/4" bolt on the steering would be to retain the u-joint to the shaft or the shaft to the gear....the knuckle thing has me confused.....easy to do by the way
Johnny
Johnny
If it's any help I sure hope a grade 8, 1/4"bolt is good enough to hold the steering shafts together because that's what I use.
#4
Senior Member
DYNO OPERATOR
Thread Starter
Join Date: Apr 2008
Posts: 496
Originally Posted by TheRabbit
Originally Posted by johnracer
You'll need to clarify exactly where this bolt is going. The ONLY place I'd use a 1/4" bolt on the steering would be to retain the u-joint to the shaft or the shaft to the gear....the knuckle thing has me confused.....easy to do by the way
Johnny
Johnny
If it's any help I sure hope a grade 8, 1/4"bolt is good enough to hold the steering shafts together because that's what I use.