chevelle rear end
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: May 2009
Posts: 5
chevelle rear end
whats up guys. i have a couple of questions. i have a narrowed 9 inch rear end in my car. it was a sloppy job by previous owner. would it be best to stay with 9 inch, or i have a good 8.8 with disc brakes.would it hold. my car is a 70 pro street with 468 bb. i dont race it just mostly highway and to car shows but if i blow them off will it hold.thanks for any answers
#4
Junior Member
SHOW GUEST
Thread Starter
Join Date: May 2009
Posts: 5
chevelle rear
kinda what i thought. alot of guys run them in mustangs and hold fairly well but they are light cars. my chevelle is quite a bit heavier. i just had this one and thought it would be a qiuck change but if it want hold up i dont want it. the 9 i have is shorter on one side and just a really shabby job as well as the welding. i can pick up another 9 pretty cheap. then have it narrowed up right.