How fast?
#21
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044
Re: How fast?
Originally Posted by whitey70ss
The reason I ask this question is because I have the interior out and if this combo is gonna put me faster than 11.49 I'm gonna need a cage. No better time than now.
454 .30 over
10.2 to 1 comp
cam is 242-248 602-602 112LS hyd. roller
patriot heads 320cc runners, comp valve job ferea valves
1.7 roller rockers
edelbrock victor jr
Holley 950HP
4speed muncie 2.54 1st gear
12 bolt 4.11's
26x10x15 slick
All this in a full interior bench seat 70 chevelle.
454 .30 over
10.2 to 1 comp
cam is 242-248 602-602 112LS hyd. roller
patriot heads 320cc runners, comp valve job ferea valves
1.7 roller rockers
edelbrock victor jr
Holley 950HP
4speed muncie 2.54 1st gear
12 bolt 4.11's
26x10x15 slick
All this in a full interior bench seat 70 chevelle.
Putting a cage in is always a good idea anyway.
Go ahead and do it, if your anything like most of us racingjunkies and I think you are, your gonna be making it faster down the line so why prolong the ineviatble?
Cp
#22
Senior Member
EXPERT BUILDER
Join Date: May 2004
Posts: 284
Originally Posted by whitey70ss
yep your correct tod74, but you forgot all the other defensive posts from gungho!
#23
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Apr 2009
Posts: 175
I guess I'm eatin crow pie for this! But I guess If you want to go fast and your income is a 1/3 of what it was 6 months ago you do what you got to. I'm not proud to say I have these heads, heck I even asked the machinist if we could mill the patriot off the front of the heads! I will say for the money they dont look bad, but looks and performance are another thing!
#24
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
Originally Posted by whitey70ss
yep your correct tod74, but you forgot all the other defensive posts from gungho!
#25
Senior Member
EXPERT BUILDER
Join Date: May 2004
Posts: 284
Originally Posted by whitey70ss
I guess I'm eatin crow pie for this! But I guess If you want to go fast and your income is a 1/3 of what it was 6 months ago you do what you got to. I'm not proud to say I have these heads, heck I even asked the machinist if we could mill the patriot off the front of the heads! I will say for the money they dont look bad, but looks and performance are another thing!
#30
Senior Member
EXPERT BUILDER
Join Date: May 2004
Posts: 284
Yes I concur,but I was saying at best,with good weather and all dialed,but more like a mid twelve to start with.that would be just my guess,of course there are a lot of variables,I would go with the biggest cam the heads will allow if I were running a four speed.