thoughts on engine build

Thread Tools
 
Old 12-11-2021, 10:32 AM
  #1  
rut2nut
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Dec 2021
Posts: 1
Default thoughts on engine build

582 BB dart 9.800 block callies 4.375 crankshaft , callies 43406.385 rods racetech pistons with gas ports setup for nitrous, tool steel wrist pins, total seal 043 stainless rings, billet rail oil pan and valve covers, brodix full cnc ported head hunter 385 heads, manley valves, PAC triple springs, jesal soild body HD rockers and one piece rocker system, jesel belt drive 904 BAM lifters,custom comp .900camshaft manley165 wall pushrods, full ported victor JR, holley sniper , msd billet distributor msd crank trigger arp studs, speedtech annular stainless tech 1 pro mod nitrous system150-450
rut2nut is offline  
Old 04-07-2022, 08:09 AM
  #2  
sepmaret11
Member
JOURNEYMAN
 
Join Date: Sep 2021
Posts: 31
Default

Engine models are available online but I'm not sure about a 2 cylinder. If you are just curious about how one works I would recommend a lawn mower engine. You shouldn't have problems finding one and most can be disassembled with a cheap socket set. There are TONS of videos on Youtube that explain small engine repair in detail. Have fun!!
sepmaret11 is offline  
Old 04-22-2022, 02:04 AM
  #3  
GSI_114893928742681855241
Junior Member
APPRENTICE
 
Join Date: Dec 2021
Posts: 10
Default

thanks for ur ideas



192.168.100.1 192.168.1.1

Last edited by GSI_114893928742681855241; 04-24-2022 at 04:59 AM.
GSI_114893928742681855241 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -