Chevy V6 Stud Girdle
04-24-2008, 05:38 PM
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: Nov 2006
Posts: 14
Chevy V6 Stud Girdle
Is anyone aware of a stud girdle that will fit 23 degree Chevrolet V6 Bowtie heads (90 degree V6, not 60 degree V6). Since the 90 degree V6 is esentially a small block less two cylinders, can a standard small block chevy one be modified or is the valve spacing different?
Thanks
Mike
Thanks
Mike
04-24-2008, 07:09 PM
#2
Member
JUNIOR BUILDER
Join Date: Jul 2003
Location: U.S.A.
Posts: 80
Re: Chevy V6 Stud Girdle
Originally Posted by v6spitfire
Since the 90 degree V6 is esentially a small block less two cylinders, can a standard small block chevy one be modified or is the valve spacing different?
Thanks
Mike
Thanks
Mike
04-25-2008, 05:06 AM
#4
Senior Member
RACING JUNKIE
Join Date: Feb 2004
Location: san antonio, texas
Posts: 1,233
hey bud, i don't know about stud gridles but these guys had alot
of v6 race parts, i bought the stroker kit for my v6, worked great.
you can just check it out, thought i would thro that your way. :wink:
http://www.engine-parts.com/
of v6 race parts, i bought the stroker kit for my v6, worked great.
you can just check it out, thought i would thro that your way. :wink:
http://www.engine-parts.com/
