Brakes

Thread Tools
 
Old 03-19-2012, 06:52 AM
  #1  
minko
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jan 2005
Posts: 1
Default Brakes

Just purchased a 64 Chevelle with all new brake lines, wheel cyl, master cyl (single), and shoes. When I start driving the car the front wheels lock up TIGHT when appling the brakes for the first 20 to 30 yards then after that distance they work as intended. Checked all the springs and shoes, they are in the correct places, nothing binding. I'm at a loss on this one???
minko is offline  
Old 03-19-2012, 07:21 AM
  #2  
fast75vega
Senior Member
RACING JUNKIE
 
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
Default

alot of the older chevy trucks and car do that if they sit for a few days and its damp out. my suburban has been doing that for 5 years that i owned it... even after putting everything new on it for brakes. just gently put your foot on the brake pedal and give it some gas as you backing out the driveway... it will quit grabbing faster .... lol
fast75vega is offline  
Old 03-19-2012, 01:49 PM
  #3  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

I had a 66 Nova, with drum front and 9" Ford rear drum brakes, it ran mid to low 10's also with a single master cylinder, it would lock up the front wheels in a heartbeat. In fact i got disqualified at a race when the throttle linkage stuck on the tunnelram manifold, and i stupidly hit the brakes too hard after the finish line blowing out the left front tire. I stayed on the track but the track operator still put me out even though it was after the qtr. mile. I ran the car for 5 yrs and never could get it to stop hitting the front brakes harder than the rear. Maybe changing out the masterclinder to a duel master cylinder might fix it but i never tryed it.

Zip.
zipper06 is offline  
Old 03-19-2012, 04:39 PM
  #4  
olds48
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Location: Montvale, VA
Posts: 1,431
Default

Yup.Nature of the beast.My 66 Impala will do the same thing. Single pot M/C on that one,too.I just run my front brakes a tad out of adjustment and it seems to help dramatically. Whatever seems like the correct place for the adjuster to go,I just loosen it one full turn. You lose a touch of pedal firmness.Not much. But it cures the cold grabs
olds48 is offline  
Old 03-19-2012, 05:19 PM
  #5  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

A safer alternative;

http://www.jegs.com/c/Proportioning-...FckJRQodwH-NKw
TheYellaBrick is offline  
Old 04-27-2012, 05:11 AM
  #6  
outlaw256
Senior Member
RACING JUNKIE
 
Join Date: Mar 2008
Location: falkville al
Posts: 1,764
Default

yeah DD. is right. i have a 67 impala that will throw you in a ditch if you hit it to hard.and ive been setting up drum brakes for 40 yrs.i backed out my wifes 67 monday and took it for its first ride after a complete restro and man i almost lost it.because it grabbed so bad. bought that thing home did my maqic and its still doing it.lol and it didnt do it before i tore it down.
outlaw256 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -