kod99

Has anyone had any experience with the Proform Vehicle scales that Jegs sells? Are they any good? They are a reasonable price, $650 after the racer's discount. I assume they will weigh a car with 17" slicks as long as they are centered on the 15" pads.

Jegs
http://www.jegs.com/i/Proform/778/67650/10002/-1

wrightway

Myself I have not had too many good experiences with proform
Although I have not used or seen the scales yet

gungho

[quote="wrightway"]Myself I have not had too many good experiences with proform
Although I have not used or seen the scales yet[/quote

Care to elaborate?

signsbyesa

i used the proform ring gear depth gauge, rod bolt stretch gauge,
heavy duty bench spring tester, all worked great, have not used
the scales, my experence, good luck :wink:

wrightway

First proform I ever bought was there adjustable shift light completely unreliable
Next was a TDC locator for a sbc spark plug hole would not thread in exchanged it for another one same problem
Lastly and I mean lastly was the valve spring presser gage that is used in a vice or drill press it did not even make it though one set springs before I started to get some fu#@ up numbers because the gage was and is still reading 50 something pound with no load on it
For me it’s been three strikes and proform is out

straightlinecole

Does that come with a couple of free pork egg rolls?

whitey70ss

Bungho must have serious stock in pro form pro top line etc etc, man your on the hunt for anyone to talk bad about any of there products! try buyin AMERICAN, yes you might have to save up a little longer but you are supporting american workers! sorry to go off topic! :wink:

MEMRACING62

ya forgot procomp too

whitey70ss

I meant to include them !

DirkaDirka

This might be good........