jordans performance/south carolina
#3
Senior Member
DYNO OPERATOR
Join Date: Jan 2004
Location: central Illinois
Posts: 459

I never heard of them too, but thats not a bad thing either.
I would recommend you compare at least 2-3 engine builders before deciding.
NYES AUTOMOTIVE in Muncie, Indiana is a good one. They are a dealer on this site and have engines listed for sale in the engine section. Ask for PAT.
I would recommend you compare at least 2-3 engine builders before deciding.
NYES AUTOMOTIVE in Muncie, Indiana is a good one. They are a dealer on this site and have engines listed for sale in the engine section. Ask for PAT.
#6

I know of two guys locally that aren't real pleased with thier Nyes BBC with little to no help from them. One was just freshened and let go in the water box the other had six passes and found aluminum in the oil filter. They never chamfered the bottom of the cylinders. Didn't do the coated pistons much good.
#8
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Ohio
Posts: 936

If they are close to you, run down and check out the shop. If not, and you have doubts, can you find the same deal close to home or one about the same price that would make you feel better?
That is always the tough thing when you buy/sell a motor. I have my motor listed in the classifieds but I know the questions I will get and they are genertally questions that the buyer asks trying to find trust and confidence that they feel they are getting a good motor. There are too many scammers out there and a motor is one of the easiest things to pass off on quality but in reality it is junk.
That is always the tough thing when you buy/sell a motor. I have my motor listed in the classifieds but I know the questions I will get and they are genertally questions that the buyer asks trying to find trust and confidence that they feel they are getting a good motor. There are too many scammers out there and a motor is one of the easiest things to pass off on quality but in reality it is junk.
#9
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998

Originally Posted by BEAST477
I know of two guys locally that aren't real pleased with thier Nyes BBC with little to no help from them. One was just freshened and let go in the water box the other had six passes and found aluminum in the oil filter. They never chamfered the bottom of the cylinders. Didn't do the coated pistons much good.
Shawn is right, if they are close go look at them. If not, shop around ask a bunch of questions up front .. ask the what if questions also ..