Results 1 to 1 of 1

Thread: alldeck BBC Pushrod problem

  1. #1
    Senior Member EXPERT BUILDER
    Join Date
    Mar 2003

    alldeck BBC Pushrod problem

    Im building a BBC Talldeck And am having a hell of a time finding the right pushrod.I called Comcams and the Pushrods I have are .020 shorted than stock talldeck length but the tech says that's good.Im running a comp 282 Hyd cam setup and when I went to install the pushrods the Rockers will not reach the pushrod? Im running Brandnew Procomp Alum Heads And these are Edelbrock Pushrods.Is it a lifter problem? I know someone out there has had this problem before and I would really appreciate your can Text me at 361-548-3327 or email me at [email protected] & thanx in advance.I don't know if it makes any difference but I decked the block .010 but to me that should make the pushrod .010 longer?

  2. Racing Junk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy