Need help finding Dzus fasterners
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Dec 2008
Location: Sugar Hill, GA
Posts: 1,365
Need help finding Dzus fasterners
There is a specific quarter turn fasterner that I need to find.
#6 winged, self eject with a .550 length.
I can find everything inthe world in the #5 size, but cannot locate this in the #6.
There are winged fasteners with out the base, but I'm already drilled for the base.
Thanks, Dave
#6 winged, self eject with a .550 length.
I can find everything inthe world in the #5 size, but cannot locate this in the #6.
There are winged fasteners with out the base, but I'm already drilled for the base.
Thanks, Dave
#2
Is this what you are looking to find? I can only see .5 & .6 inch
http://www.racerpartswholesale.com/p...ners_And_Tools
http://www.racerpartswholesale.com/p...ners_And_Tools
Last edited by fla1976; 11-07-2014 at 05:17 PM. Reason: more info
#3
I think Jegs has them. Without the wings?
http://www.jegs.com/i/JEGS-Performan...oductId=763087
With wings.
http://www.jegs.com/i/JEGS-Performan...oductId=763087
http://www.jegs.com/i/JEGS-Performan...oductId=763087
With wings.
http://www.jegs.com/i/JEGS-Performan...oductId=763087
Last edited by fla1976; 11-07-2014 at 05:23 PM. Reason: info
#5
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Dec 2008
Location: Sugar Hill, GA
Posts: 1,365
Thanks everybody. There is such a lack of data on the sites and I'm guessing they assume all Dzus are the same. I am already drilled with 1 1-3/8 hold spacing, not the 1" which is (by far) the most common. To try and redril tot he smaller dimension, I lose all structure strength.
Dave
Dave