Results 1 to 5 of 5

Thread: Need info on value of 1965 Vette 327/365 HP engine

  1. #1

    Need info on value of 1965 Vette 327/365 HP engine

    Just bought a '66 Chevelle with a 1965 HH Corvette motor 327/365 HP motor. Motor is .30 over and rebuilt by pro shop with excellent track record. Has 200 miles on it with papers and all matching factory distributor, intake and factory Holley carb (completely rebuilt). Tried to attach photo and build sheet but it would not upload. Motor is balanced. engine suffix F0226HH Jan 26th Cyl block 2870 Dated A225; cylinder heads 3782461 Dated A255, A205; crankshaft 4577 Holley carb 2818-1 dated 512; distributor 1111069 dated 4M14; Intake Alum. Hi-Rise #46 1
    new TRW pistons, 11 to 1 CR, new Corvette solid lifters and new GM 30-30 cam, 6 qt. oil pan; new dual valve springs, 2.02/1.60 SS valves, hardened seats and bronze valve guides, new rocker arms, balls, nuts and new push rods; everything was magged and no cracks...5 angle valve job and no porting of any kind.

    My question is what is what is this motor worth (ballpark range)...and does anybody on the forum have a need for this particular somewhat rare motor. It has the 30-30 factory cam and is the solid lifted motor. I can send the build sheet also. You can reach me through this forum (or better yet through my email at bamafrost at yahoo dot com) or call me 256/443.8846.

    My name is Tom and the motor is in NW Alabama and still in car...hear it run. Selling to go with more of a milder (old man's) 300 hp 327 (no need for matching number/year block as my car is not numbers matching).


  2. #2
    Senior Member RACING JUNKIE TheYellaBrick's Avatar
    Join Date
    Mar 2008
    Emmett, Idaho
    Tom, ya only need to post this once .......multiple posts get into the realm of spam and SPAMMING is a negative mark on your wall .....
    to those who

    God Bless our folks in uniform
    "We the People, have your backs"

  3. #3

    no spam intended

    Sorry about that...shoulda read the rules and wasn't sure where it'f "fit" best. Tom

  4. #4
    Senior Member DYNO OPERATOR
    Join Date
    Jan 2004
    central Illinois


    Probably fits best in CLASSIFIED section under ENGINES. Ask $5000 OBO and see if anyone makes an offer.

  5. #5
    Moderator RACING JUNKIE Harbone's Avatar
    Join Date
    Aug 2007
    Blog Entries
    Vette motors are priceless...

    As close to "Normal" as I can get...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 MH Sub I, LLC dba Internet Brands All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy